Thursday, December 20, 2018

Faux Art Glass Cypriote Lava Vase


These vases were inspired by Tiffany Cypriote Lava vases.




This is a true Cypriote Lava Vase
This vase sold at auction for $50,000.
I can't afford to buy one so I made one with Polymer clay. 


Items you will need to complete this project

Black, Blue & Gold clay (or other dark clay)
(it really dosen't matter what colors you use, these were just my choices.)
Pasta machine or roller
tissue blade
craft knife
sculpting tools
pearlx powder
soft pastels
Gold mica powder or Gold eye shadow
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Let's get started.
To begin, make a form with thin aluminum foil, the heavy duty foil doesn't work as well for this purpose. You can make it any shape you choose.


(I made this larger vase after the first one and I only have a few pictures,
 but the process is the same as the smaller piece.)



You could also work the clay over an existing vase, but I choose the foil for my first attempt. 




Roll layers of the clay out on the thinnest setting of your pasta machine.


 Cover the foil shape with the clay then work it
 together to smooth it out. Next, form a rim.
 My vase looks a bit "wonky", wonky is what I do best. :)


Add surface detail with your ball tools.
 I guess you could use anything you have to create the desired effects.






Keep working the surface texture detail until you get it the way you want. 


Now it's time to add the colors and pearl powder. Keep in mind, the first layer you add is the only one that will "stick" to the clay, so try to get everything you want on the first application.


Once you have it the way you want, time to cure the clay. I put this vase in a cold oven and set for 275 degrees, baking it for 1 hours and 20 minutes. 

I have heard it said that ovens spike when they first begin to heat up, that's why it is suggested that you preheat your oven before you add your clay. My oven works well on the heat up, never had a problem so I start cold.



When your piece if baked and cooled, it's time to add the "lava".  


Roll your gold clay out on the thinnest setting on your pasta machine.


Drape the clay over your vase and cut away the extra
 to form the lava flow points. 
This is the trickiest part of this project.
 I tried to sculpt the lava to look natural.




Once you get the lava the way you want it, it's time to add the Gold Mica to the gold clay.


Ready to go back in the oven for a second bake. Same as above.
(I cure all my clay at the same temp and time, even tiny thin items.) Easier that way.





It is all done, enjoy your Art Glass Vase!



Monday, December 3, 2018

Polymer Clay Christmas Trees


To make these Christmas Trees, you will need:

Premo White Translucent Clay 
Premo White Clay
Premo Green Clay 
Premo Red Clay
Premo Accents Gold Clay 

Soft pastels (greens & browns)
Parchment Paper  
aluminum foil
Roller or pasta machine
Pattern stamps
Gold mica powder
Sculpty Bake & Bond
Tissue blade & craft knife
Scissors 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

First, mold the aluminum foil into the size tree you want to make,
 then cover it with a "base coat" of conditioned clay.



These are the beginning of my two trees, ready to go into the oven. I guess you could make the trees with out curing the base first, but it would be more difficult.


(They were baked at 275 degrees for 1 hour.)

(You don't need the toothpicks, 😉 These Christmas Trees were an experiment and I thought tooth pics would be useful in holding up the "branches", but they weren't needed.)



Most of the stamps I used to create the Gold CT, were from a silicone strip used for fondant, I found it in the bakery section of AC Moore. As you can see, I cut many stamps out of the strip. 


The tree topper was made ahead of time. Use a round stamp. (it could be anything you already have), decorate with gold mica powder. (It was cured to be easier to work with later.)






 The gold tree was assembled in layers, staring at the bottom. Roll out a long thin sheet of conditioned translucent clay, I used #5 on my pasta machine. The clay has to be thick enough to take the stamp but thin enough to have light shine through after curing.

Use the scalloped stamp to make an impression. This is the stamp I used.


Cut the bottom of the scalloped edge first, before adding the mica power, then cut the top. 



Scrunch the top of the strip together to gather the lace.





 Use "bake and bond" as you affix the lace to the tree form. I didn't use a lot of it, just a little will do and only a bit on each row.  On the lower tiers, I added a round of rolled parchment paper between the layers, (see above), the roll was held together with a staple. I also stuffed small bits of P paper where needed to poof out the lace.

 I used quite a bit of rolled up parchment paper in this project. You can remove it easily after curing, nothing seems to stick to parchment paper, love the stuff. 
 Continue on until you reach the top, then affix your pre baked ornament. The balls were made with gold clay and rolled with gold mica powder.  They are hard to keep in place because the extra mica powder makes them slippery, just bake them separately and affix with super glue after curing.

(I baked my tree at 275 degrees for 1 hour.)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

That reminds me, there are a lot of little things that make this technique possible. For one thing, the surface you work on is important. I use a smooth tile, 8"x12". (pictured below)
You need a surface like this to cut around thin pieces of clay, as in this border. It would be very difficult to do if the clay didn't stick down to the surface. After the border is cut, you can lift it carefully with the help of your tissue blade. If it breaks, try making the clay a bit thicker. If you are a beginner, I strongly recommend watching as many Polymer Clay YouTube tutorials as you can, that is the way I learned about handling PC.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

For the Green Christmas Tree, condition your clay and roll it out on the thickest setting on your pasta machine.  Color with soft pastels as shown.



Use a round cutter to make circles and make cuts with scissors to form the pine needles.


Affix them in rows to the base tree with "Bake & Bond" as shown, no need to puff these branches out. Decorate as desired, "this is the fun part"
😉
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Here are the instruction for making the mini candy canes.

You will need well conditioned red and white clay and an extruder. I used the disks shown here, the tiniest two holes. Extrude and assemble as shown. There is a trick to doing the candy canes to make the red stripe nice and even, I only got good at it when I was working on the last ones, so the first ones are a bit wonky.

Hold the clay strips in position as you roll the white strip into the red one, then lightly roll the two together. (that's when they really start to look like candy canes) 
My candy canes are 1 1/2" long, but you can make them any size and any thickness. 

I think candy canes make great decorations on Christmas items. 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 





That's it, hope this tutorial helps you create your own Polymer Clay Christmas Trees.  If you wish to share your creations, I would love to see a picture. My user name on Facebook is "Evie Campbell" same avatar as the one in my blog.



















Wednesday, November 28, 2018

Pink Roses & Forget Me Nots with Shimmering Gold Lace

Translucent Lace Tutorial




This vase was decorated with a new technique ( for me), I wanted to create a realistic shimmering lace to change the profile of the vase..  Below is what the vase looked like before decorating with PC.


 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


The roses were made first then the leaves and little blue flowers.


 

When I started to add the flowers, the vase just didn't look right so I decided to try and add translucent lace, if possible, to soften the whole effect. Here are pictures of the steps I used to make the lace.
 . 
This lace dollie was rolled into a sheet of Premo Accents  white Translucent clay. The clay was conditioned on the pasta machine at a 4 or 5 setting.  It's important to keep the clay as thin as possible to make it more translucent and ethereal after curing. but if the clay is too thin, it will sag and break at the cut out areas, 

Using a straw, or a small punch, "cut" the holes in the lace. (Try not to get them too close together because they will most likely break when gravity pulls the clay down. (Several of my holes broke so I know this from experience) :)


I used gold mica powder to add the metallic shimmer to the lace and then I cut it out with a craft knife.


It was ready to drape onto the vase in a pleasing way, if possible. The pictures below show how I arranged it.





Ready to go into the oven.  I used Polyester fiber fill to "plump" out the lace before baking. Gravity still pulled it down so I cured it face up laying on a bed of fiber fill.  The lace was a little wonky on the left side when I took it out of the oven, so I reattached it with the help of super glue.

I place my clay in a cold oven then set it for 275 degrees.
 It bakes for 1 hour and 20 minutes.

I think this technique has a lot of potential to add soft flowing lines to our creations. If you try to make some of this beautiful lace. please share your creation with me, I can learn from your experience also. Please contact me on Facebook or leave a comment here in blogger.

Facebook user name, "Evie Campbell"